Home > Service > Service

Technical Data Sheet

INDEX	UNIT	TECHNICAL INDICATIONS
INDEX	UNIT	60SLO SERIES	75SLO SERIES
HYDROXYPROPYL	%	7.0-12.0	4.0-12.0
HYDROXYPROPYL	%	0.2-0.3 (DS)	0.1-0.3 (DS)
METHOXY	%	28.0-32.0	19.0-24.0
METHOXY	%	1.8-2.0 (DS)	1.1-1.6 (DS)
WATER	%	5.0 MAX	5.0 MAX
PARTICLE SIZE	%	90% THROUGH 250μm (ASTM MESH NO. 60) 80% THROUGH 125μm (ASTM MESH NO. 120) 80% THROUGH 106μm (ASTMMESH NO. 140)
VISCOSITY (2% SOLUTION NDJ)	MPA.S	5-200000
GELLING TEMPERATURE	℃	56-64	68-90
LIGHT TRANSMITTANCE	%	70 MIN	70 MIN
WHITENESS	%	75 MIN	75 MIN
PACKING DENSITY	G/L	370-420
APPEARANCE		WHITE OR ALMOST WHITE POWDER

Previous: Dissolution Method

Next: Application of HPMC in building materials

Related Products

HPMC For Drymix Mortar

HPMC is widely used in drymix mortar industry. Could be soluble in water and form the transparent solution. As the important additives in mortar, Hydroxyproypl methyl Cellulose could increase the water retention, increase the workability and increase open time etc.
HPMC For Wall Putty/Plaster

In building materials, the addition amount of HPMC is very low, only 0.1%-1%, but it plays an irreplaceable role and can significantly improve the water retention, fluidity and lubricity of building materials.
HPMC For Tile Adhesive

Tile adhesive is a new type of modern decorative material used to paste decorative materials such as ceramic tiles, face tiles, floor tiles and so on. There are many kinds of additives in tile adhesive, but usually adding cellulose ether additives to tile adhesive can improve water retention, thickening effect and open time.
HPMC For Joint Filler

HPMC cellulose ether enhances mortar and board caulking agent by improving anti-cracking shrinkage and strength, minimizing the risk of cracks, and extending working time. With superior water retention properties, it prevents issues like fast drying and poor hardening, ensuring optimal hydration.
HPMC For Self-leveling Mortar

In building materials, the addition amount of HPMC is very low, only 0.1%-1%, but it plays an irreplaceable role and can significantly improve the water retention, fluidity and lubricity of building materials. Building materials added with HPMC are easier to mix and use, improve the work efficiency of construction workers, extend the open time, improve the bonding strength, and form a smooth and d
Daily Chemical Detergent Grade HPMC Cellulose

Daily chemical Detergent grade hydroxypropyl methyl cellulose (HPMC) is a synthetic high molecular polymer prepared by chemical modification with natural cellulose as raw material.
Gypsum Special Grade HPMC

Hydroxypropyl methyl cellulose (HPMC) is a non-ionic cellulose ether obtained by cellulose alkalization, etherification, neutralization and washing.
VAE/RDP Powder

Redispersible Emulsion powder is a powder binder made from a special emulsion (high molecular polymer) spray-dried. This powder can be quickly dispersed to form an emulsion after solving into water, and has the same properties as the initial emulsion, that is, a film can be formed after the water evaporates. This film has high flexibility, high weather resistance and good adhesion to various mater
Wholesale PVA Polyester Polyvinyl Alcohol PVA 2488

Cosmetic Grade Polyvinyl Alcohol CAS 9002-89-5 Polymers, PVA 2488, also known as Polyvinyl Alcohol 2488, is a premium-grade cellulose ether produced by our esteemed PVA alcohol factory. With its exceptional quality and versatility, PVA 2488 has become a preferred choice for numerous industrial applications.

Navigation

E-mail: jenny@hpmcfactory.com

Tel.: + 86 18132289294

Fax: +86 311 8569 0996

WhatsApp: 8618132289294

Add.: Room 905, RongTongCaiJin Building, No.598 Zhongshan East road, ChangAn district, Shijiazhuang City, Hebei Province, China.